Showing posts with label scrap box. Show all posts
Showing posts with label scrap box. Show all posts

Monday, November 14, 2011

Scrap Box Sunday: Features & Link Party #19

It was a small party but there were some absolutely fabulous ideas linked up!

Featuring my faves...

Ear Warmers & Cozy Pants from Falafel and the Bee




T-Shirt Ruffle Scarf from Vintage Gwen


Your awesome ideas rock my socks! Feel free to grab a featured button here:







Time For Linky Party #19!

Link up anything that you've made with scraps lying around your craft room, kitchen, wherever!
This party will close on Saturday November 19th!

Just display H&H's button somewhere on the post or in your sidebar, and link up! Link as many projects as you want, as long as you haven't linked them up here before. And remember to visit at least two other projects and leave a nice comment! Everyone loves visitors! <3





Monday, November 7, 2011

Scrap Box Sunday: The Link Party is BACK!

I can't believe I haven't run one of these since JULY! Wow, life really has been so busy!
I feel like I'm so out of the loop, so please link up so I can catch up on what you've been doing <3


Time For Linky Party #18!

Link up anything that you've made with scraps lying around your craft room, kitchen, wherever!
This party will close on Saturday November 12th!

Just display H&H's button somewhere on the post or in your sidebar, and link up! Link as many projects as you want, as long as you haven't linked them up here before. And remember to visit at least two other projects and leave a nice comment! Everyone loves visitors! <3





Sunday, June 12, 2011

Scrap Box Sunday: Link Party #12 continued...

The link party is still going! Join in the fun!

I'm officially "not here" right now but the link party from last week is still open! Link up anything that you've made with scraps lying around your craft room! It doesn't have to be fabric scraps, it could be paper, ribbon, food, beads anything! You've got until Thursday! 

Just display H&H's button somewhere on the post or in your sidebar, and link up! Link as many projects as you want, as long as you haven't linked them up here before.






Sunday, June 5, 2011

Scrap Box Sunday: Cartoon Decoupage Earrings

When Grandma recently moved house, I managed to aquire quite a collection of old comic books - I'm pretty excited about these and have a heap of ideas in mind! Here's my first one!

Cartoon Decoupage Earrings!

What you need:
* Wooden beads
*  2 earring hooks
* 2 head pins
* 4 bead caps
 * Mod podge (I used gloss)
* Cartoons (I actually scanned my cartoons and printed a copy so I wouldn't ruin the originals)

What to do:

To hold my beads while I worked, I used a plastic picnic bowl and cut notches in the sides, through which I stuck a straw holding my beads. I would've preferred a chopstick or skewer because they're sturdier than straws but I didn't have one, and this IS scrap box Sunday after all!


Chop your cartoons into little pieces. Different shapes and sizes are good, but keep it small or it'll be hard to attach to your bead.


Use Mod Podge to cover your wooden beads with pieces of comic. Give the bead a final coat of Mod Podge as well for good measure.


Let them dry, remove them from your holder and trim off any rough bits around the bead's holes. They should be looking something like this:


The ink from my cartoons ran, blurred and faded - unsurprisingly! Do you have any tips to stop the ink running? In this case it actually looks kind of cool, but I don't want it to happen all the time.. I'll let you know if I work something out!

OK, now let's assemble our earring! For each earring I used a head pin, two bead caps and an extra little tiny bead cap for the bottom so my beads wouldn't fall off the end of my head pin. You might not need those, depends on the bead caps you use.


Thread everything onto your head pin and then use your pliers to bend the wire to one side, like so: 


Trim off any excess wire, then use your round nose pliers to bend this into a loop:


Attach your earring hook then repeat the above steps to create your second earring.


And you're done! Some funky, statement jewellery with a geeky twist!



Sunday, May 29, 2011

Scrap Box Sunday: Lace Cuff Bracelet

First of all beautiful people, let me apologise for being so late to post today! My lovely man started his new job this week and so we've been getting into a new routine and crafting and blogging has taken a back seat until we get entirely settled.

Still, I do have a project to share with you today! Another Anthropologie inspired one, as I'm afraid I'm too tired to be creative enough to come up with something fully original!! Here's the inspiration, Anthro's $228 (!!!) Lavish Lace Bracelet:

(c) Anthropologie

And here's my "lazy" lace cuff bracelet tutorial, which turned out to be a bit Alice in Wonderland inspired too! Mostly because the lacy fabric I had on hand was a pretty pale blue ;)


What you need:

* Scrap lace fabric
* Jewellery wire
* Hot glue gun
* Optional - other embellishments, I used ribbon and buttons

I didn't end up using the white fabric or embellishments, maybe next time!


What to do:

Cut two long strips of wire. These need to be long enough to make a circle that can slip over the widest part of your hand, so work out how big the widest part of your hand is and then make it another inch or so longer.


Cut three to five short strips of wire. The length of these dictates how long your cuff will be. I'm lazy so I did three strips, but I think you'd get a better outcome with 5 (Anthro used four and their bracelet is a bit boxy). Next time I make one I would try 5.


Take your short wire strips and make a loop at both ends of all of them. For extra durability, I looped it a bit more than I would if I were making a headpin, like this:
 

Slide your long wire piece through the loops at one end of all of your short wire pieces, then twist the ends of the long wire pieces together to make a circle. 


Repeat with the other end of your short wires and your other long wire. It should now look like this (sorry for the completely awful photo):


Adjust the short wires so they're roughly evenly spaced around the circles, and use your hot glue gun to keep them in place. 


Cut a long strip of fabric long enough to wrap around the entire wire frame, allowing about 1 cm extra height so you can fold the top and bottom edges over. Also cut a thin strip of fabric for each short strip of wire you used. 

I ended up cutting the three little strips shown here in half again because they were too wide.


Run hot glue down the inside of your short wire and attach your little fabric strip so that the "open end" faces outwards. The open end will be covered when we wrap the whole frame in fabric. 


Repeat so all of your short wires are covered with fabric.


Run a strip of hot glue down the outside of one of your short strips of wire and attach your long piece of lace fabric. You want to keep the fabric taut through all of this to ensure a nice finish.

When the first short wire strip is attached, run glue down the next fabric strip and roll your bracelet to attach it to the fabric, pulling the fabric taut (but not so tight than the glue unsticks!) Like so:


Repeat for all of your short wire strips, and again for the first wire strip so that the entire bracelet is covered. You should have something like this:


Trim off the end of your long fabric strip, then run glue around the inside of the top and bottom of your bracelet and fold the excess fabric inside the cuff, so that both ends look like this:


Trim off any excess fabric of hot glue gun "spiderwebs" and you should have something vaguely resembling Anthro's $228 bracelet:


You can stop there if you want. I couldn't, I felt the need to embellish:


I just ran some frilly lace around one edge, some plain ribbon around the other, and hot glued a few buttons down the middle. Now it feels like Alice in Wonderland costume jewellery! Perhaps I need to make another one so I have a pair ;) I think this would look pretty cool tucked under a white long-sleeved shirt.

I plan to make another plain one using white embroidered fabric so I will share how that turns out when I get around to it! Hope everyone had a lovely weekend! <3


Sunday, May 15, 2011

Scrap Box Sunday: Scrap Fabric Bowl

Last Sunday I promised you a scrap busting version of the doily "Stiffy" bowl ;) so here it is!


What You Need:
* Fabric stiffener
* Mod Podge (I used Gloss, but recommend Matt)
* Plastic wrap
* Plastic bowls
* Fabric scraps!



What To Do:

First, if your fabric scraps are large, cut them into smaller strips and rectangles. A variety is good!

Pour some fabric stiffener into one of your bowls. Soak one of your scrap fabric pieces in the liquid.


Stick this, right side facing in, onto your upturned other plastic bowl. 

But before you do this, cover your upside down bowl with plastic wrap! Otherwise it's hard to remove your fabric bowl later. Yet again, I forgot. I'm smart like that.


Continue soaking and sticking strips, with the right side facing into the bowl. 


When it's completely covered, it should look something like this:

What a mess! This is lots of fun :D

Now we're going to do a second layer of fabric just like we did the first, except this time the fabric strips face out from the bowl.


When it's completely covered, try and squeeze out any excess fabric stiffener. Smooth all the strips down as best you can. It should look something like this:


Let this dry. It might take a while!

When it's dry, remove the fabric from the plastic bowl. If you used plastic wrap, this will be easy. Otherwise, it's a bit of a challenge! I completely ruined my first plastic bowl - see in the background? :(


Now you should have something like this:


Trim around the edges to even everything up.


Now, this step is of course optional.

Take a strip of coordinating fabric cut on the bias.


Paint on Mod Podge all around the top edge of your bowl, inside and out!


Stick your bias strip around the edge of your bowl. This is a "done" shot, but it shows were the fabric strip goes:


Now, cover that plastic bowl in cling wrap again and put your fabric bowl back on. Coat the outside with Mod Podge. It will soften a little, which is why we support it with the plastic bowl again. You can do as many coats of Mod Podge as you like - I did two.


When the outside is dry, take it back off the plastic bowl and Mod Podge the inside.

Let it dry and you're done! 


My bowl is quite flexible :) I think this one belongs in my craft room!


I have hardly any little fabric scraps left now :D


Linking up at Sunburnt Cow


Related Posts Plugin for WordPress, Blogger...